The Simonis Cloth Under-Rail Iron-On Logo Transfers are designed to create the clean, professional appearance commonly seen on billiard tables used in tournament and professional pool environments.
Each transfer features crisp white “SIMONIS CLOTH” lettering designed for application to the cloth-covered face underneath the pool table rail. The long, narrow format fits naturally along the rail cloth and provides a clean branded appearance without interfering with normal play.
These are heat-transfer / iron-on vinyl logos, not conventional peel-and-stick stickers. The lettering is transferred to the rail cloth using heat and pressure.
Each package contains 2 individual SIMONIS CLOTH transfers, allowing installation on two rails or providing an additional transfer for another application.
Each logo measures 17.6 cm long × 1.8 cm high (6.93 × 0.71 in).
Important Installation Information:
The transfer should be applied while the rail is removed from the pool table. Once the rail is installed, there is normally not enough space between the rail and playing surface to properly position an iron and apply even heat and pressure.
For best results, first install and tension the cloth on the detached rail. Apply the transfer to the finished cloth-covered rail, allow it to cool, and then reinstall the rail assembly on the table.
The transfer is intended as decorative branding and is not designed to be permanent.
Product Features:
- 2-pack includes two individual SIMONIS CLOTH iron-on logo transfers
- Designed for application to the cloth-covered face underneath a billiard table rail
- Crisp white lettering creates a clean tournament-style appearance
- Heat-transfer / iron-on application rather than conventional adhesive backing
- Each transfer measures 17.6 × 1.8 cm / 6.93 × 0.71 in
- Long, narrow format designed specifically for under-rail placement
- Best applied after the rail cloth has been installed and tensioned on the detached rail
- Rail should be removed from the table during heat application to provide sufficient working space
- Suitable for pool tables, billiard rooms, clubs, tournament-style setups, and home game rooms
- Decorative transfer is not intended to be permanent
- Single-use transfer design
- White lettering provides clear visibility against many billiard cloth colors
Product Specifications:
- Brand: Iwan Simonis
- Product Type: Under-Rail Billiard Cloth Logo Transfer
- Design: SIMONIS CLOTH
- Application Type: Iron-On / Heat Transfer
- Material Type: Heat-Transfer Vinyl
- Letter Color: White
- Quantity: 2 Transfers
- Length per Transfer: 17.6 cm / 6.93 in
- Height per Transfer: 1.8 cm / 0.71 in
- Shape: Long Rectangular Lettering Strip
- Recommended Placement: Cloth-Covered Face Under Pool Table Rail
- Installation Stage: Before Rail Is Reinstalled on Pool Table
- Permanent: No
- Reusable: No
- Recommended Use: Pool Tables, Billiard Rooms, Clubs, Tournament-Style Tables and Home Game Rooms
- Package Includes: 2 SIMONIS CLOTH Iron-On Logo Transfers
- Condition: Brand New
Iron-On Application Instructions:
-
Remove the rail from the pool table – Do not attempt to apply the transfer with the rail already installed, as there may not be enough clearance for proper iron placement and even pressure.
-
Install and tension the rail cloth first – The billiard cloth should already be properly stretched and secured to the detached rail before applying the logo. Applying the transfer before stretching the cloth could distort the lettering.
-
Prepare the application area – Make sure the rail cloth is clean, dry, smooth, and free from chalk dust, lint, and loose fibers.
-
Position the transfer – Place the SIMONIS CLOTH logo in the desired location and carefully check that the lettering is straight and centered before applying heat.
-
Protect the transfer and cloth – Place parchment paper, a suitable heat-transfer protective sheet, or a clean thin cotton cloth between the iron and the transfer.
-
Use low-to-moderate heat – Turn the steam function off. Avoid excessive temperature, which may damage or discolor billiard cloth.
-
Press instead of sliding – Apply firm, even pressure for several seconds at a time. Lift and reposition the iron as necessary rather than moving it continuously back and forth.
-
Check the transfer gradually – Allow the area to cool slightly and carefully test the carrier film. If any part of the lettering has not transferred completely, replace the protective sheet and apply heat again briefly.
-
Remove the carrier film – Once all lettering is securely transferred, slowly peel away the carrier material.
-
Final press – Cover the finished lettering again with parchment paper or another protective sheet and apply a brief final press if needed.
-
Allow the rail to cool completely – Once the transfer has cooled and is secure, reinstall the finished rail assembly on the pool table.
Important: Heat tolerance can vary depending on the billiard cloth and transfer material. Use the minimum heat and pressing time necessary for proper adhesion. Do not use steam, and avoid prolonged heating. When possible, test the method on a scrap or hidden piece of similar cloth first.
